RE: 3 Axis -> 5 Axis

Subject: RE: 3 Axis -> 5 Axis
From: "Tim Goldstein" <timg-at-ktmarketing.com>
Date: Fri, 18 May 2001 22:57:20 -0600
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="us-ascii"
Importance: Normal
In-Reply-To: <4.2.0.58.20010518230558.00b36820-at-pop.sprynet.com>
Reply-To: <timg-at-ktmarketing.com>


Dan,

Is the drop box you are referring to the one on the www.linuxcnc.org site?
If so, the site seems to be down at the moment, but I will check back.

Tim
[Denver, CO]

> -----Original Message-----
>
> Tim,
> I set up a 4 axis machine and put the gui/ini files in the drop box.  Ian
> put his 4 axis interface there also (I think he did....)
>
>
>
> Dan

Follow-Ups:
- RE: 3 Axis -> 5 Axis
  - From: Ray <rehenry-at-up.net>
- RE: 3 Axis -> 5 Axis
  - From: Dan Falck <dfalck-at-sprynet.com>

References:
- RE: 3 Axis -> 5 Axis
  - From: Dan Falck <dfalck-at-sprynet.com>

Prev by Date: RE: 3 Axis -> 5 Axis
Next by Date: Re: emc-fpga.txt
Prev by thread: RE: 3 Axis -> 5 Axis
Next by thread: RE: 3 Axis -> 5 Axis

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact