DOS/EMC aka DeskNCrt now freely available

Subject: DOS/EMC aka DeskNCrt now freely available
From: Doug Fortune <pentam-at-home.com>
Date: Fri, 30 Mar 2001 00:17:40 -0700
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
Organization: Pentam Aerospace
References: <01032821372003.00419-at-Babylon> <20010329184501.H1625-at-yty.net> <01032920382102.00355-at-Babylon>
Reply-To: pentam-at-home.com
Sender: doug



I just noticed that (DOS based)  DeskNCrt  is now freely available !
Probably not the source, though :<

As a reminder, it supports the following  G-Codes:
          G00 G01 G02 G03 G10 G17 G18 G19 G20 G21 G40
          G41 G42 G43 G49 G53 G54 G55 G56 G57 G80 G81
          G90 G91 G92 G92.2 G93 G94 G98 G99

and also supports the Kulaga/Mauch encoder feedback ISA card
(for closed loop cnc control) just like its Big Brother.

http://www.deskam.com/deskncrt.html

Doug Fortune
http://www.cncKITS.com

References:
- BDI Must haves
  - From: Paul <Paul.Corner-at-tesco.net>
- Re: BDI Must haves
  - From: Henry Palonen <henkka-at-yty.net>
- Re: BDI Must haves
  - From: Paul <Paul.Corner-at-tesco.net>

Prev by Date: yemc can't connect
Next by Date: Re: yemc can't connect
Prev by thread: Re: BDI Must haves
Next by thread: problem with tar file emc-1.1.-17.src.tgz

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact