Re: upgrade problems

["Ian Wright" <Ian-at-iw63.freeserve.co.uk>]

Thanks Tim,

I suspected that might be the case but I thought it might be worth a try.
One of the resons I was wanting to experiment is that the motors I have
hooked up don't seem to be giving a reasonable speed - less than 1/3 as fast
as they will smoothly go when just fed pulses from a simple generator. I've
tried to sort out what I could change within EMC to improve performance
while using steppermod but either I'm not understanding the literature
correctly or it needs a much faster computer!

Ian
--
Ian W. Wright
Sheffield  UK
www.iw63.freeserve.co.uk
----- Original Message -----
From: "Tim Goldstein" <tgoldstein-at-mlh-services.com>
To: "Multiple recipients of list" <emc-at-nist.gov>
Sent: 29 November 2000 22:10
Subject: RE: upgrade problems


>
> The slowest machine I have run freqmod on is a 133 and I had to set the
> period value VERY large and the performance was still quite poor.
>
> Tim
> [Denver, CO]
>
>