Re: Single Servo circuit

Subject: Re: Single Servo circuit
From: Doug Fortune <pentam-at-home.com>
Date: Sat, 21 Oct 2000 00:57:29 -0600
CC: garrett beaubien <garrettb77-at-yahoo.com>
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
Organization: Pentam Aerospace
References: <20001021052837.5211.qmail-at-web9405.mail.yahoo.com>
Reply-To: pentam-at-home.com
Sender: doug


garrett beaubien wrote:

> Would anyone be interested in designing our own multi
> axis system?  I think that we could build an 8 axis
> system similar to the STG board without the superflous
> stuff like timers and interrupt controllers for a
> couple of hundred dolars.

Great idea, which comes up from time to time.  We need
someone to campaign it!

I'll have a look at your work, but also of interest is:

http://home.earthlink.net/~bfp/   has a good start on some
of the servo end, as does

           Jon Elson <jmelson-at-artsci.wustl.edu>
http://www.artsci.wustl.edu/~jmelson/Machining.html

Follow-Ups:
- Re: Single Servo circuit
  - From: Mike Gann <mikegann-at-home.com>

References:
- Single Servo circuit
  - From: garrett beaubien <garrettb77-at-yahoo.com>

Prev by Date: Re: EMC Hexapod page for the handbook
Next by Date: absence of +5V on parallel port
Prev by thread: Single Servo circuit
Next by thread: Re: Single Servo circuit

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact