RE: Linux version?

Subject: RE: Linux version?
From: Jim Register <jtregister-at-att.net>
Date: Thu, 23 Mar 2000 05:47:17 -0500
Content-Type: text/plain; charset="us-ascii"
In-Reply-To: <3.0.5.32.20000322222147.007e4b60-at-pop.up.net>
References: <3.0.1.32.20000322202703.006c6468-at-postoffice.worldnet.att.n et> <C2143BD86814D311BADF00105A6E14CD0C674F-at- ACHIĄØLLES >


At 11:19 PM 3/22/2000 -0500, Ray Henry wrote:
>
>At 08:47 PM 3/22/2000 -0500, Jim wrote:
>>
>>My 486
>>probably won't run steppers, right?  I have some small servo motors, but
>>don't want to shell out for an STG card for an exercise.  

<snippage>

>I doubt that the 486 would run freqmod very well unless you are satisfied
>with very slow motion or very large steps. My guess is that steppermod
>would do fine on a 486 for the light loads and small motors that you would
>be dealing with.  
>
>Ray

Ok, thanks - I'll go with steppermod for now.

Jim

References:
- RE: Linux version?
  - From: Ray Henry <rehenry-at-up.net>

Prev by Date: Re: I'll compile successful CAD->G-Code->HW strategies
Next by Date: RE: Linux version?
Prev by thread: RE: Linux version?
Next by thread: Re: Linux version?

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact