Re: test results

Subject: Re: test results
From: "Hassan Rabe" <rabeh-at-student.gvsu.edu>
Date: Wed, 19 Feb 2003 16:17:59 -0500
Content-Type: multipart/mixed; boundary="----=_NextPart_000_0042_01C2D832.783A5B50"
References: <20030215052305.3705.qmail-at-web14409.mail.yahoo.com> <1045326156.1617.1178.camel-at-toolbench> <00e501c09783$02a45d10$b2683d94-at-Hassan> <200302152044.h1FKid5d007308-at-btc3.up.net> <011301c2d53c$5e876200$b2683d94-at-Hassan>

Hi Ray,

I made the changes to INI file, and tested the machine again, and definitely
I had a better results. you can compare the current results with the
older one that posted.
the number of pulses that I subtracted and added to the x and y axis was
200.

Regards
Hassan

gvsu_mill_emc2.jpg

Follow-Ups:
- Re: test results
  - From: Ray Henry <rehenry-at-up.net>
- Re: test results
  - From: Ray Henry <rehenry-at-up.net>

References:
- PCI card
  - From: Mark Pictor <mpictor-at-yahoo.com>
- Re: PCI card
  - From: John Griessen <john_g-at-cibolo.com>
- test results
  - From: "Hassan Rabe" <rabeh-at-student.gvsu.edu>
- Re: test results
  - From: Ray Henry <rehenry-at-up.net>
- Re: test results
  - From: "Hassan Rabe" <rabeh-at-student.gvsu.edu>

Prev by Date: Re: encoder readings problem
Next by Date: Re: test results
Prev by thread: Re: test results
Next by thread: Re: test results

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact