Re: Params saving problem

[Babar <riet91-at-yahoo.com>]

Hi Ray
Yes I knew that emc always writes to the ini when it
closes thats why i never change the ini when emc is
running and has not closed.
The trouble is that the emc is unable to change the
params from popup menu to the axis_1 and axis_2.
I can always edit the ini directly but when something
is not working properly then it makes me disturbed!
anyways i'll assume now it is the way it works! :-)
best regards
Babar



--- Ray Henry <rehenry-at-up.net> wrote:
> 
> 
> Hi Babar
> 
> Yes, this was a problem back then.  It may still be.
>  What I do, and what 
> I recommend to those using the calibration popup, is
> tune using it 
> because it is faster, but make changes often by
> editing the ini file 
> using a regular text editor like vim, emacs, or
> kwrite.
> 
> The emc tries to write a revised ini everytime it
> closes.  You will need 
> to close out the emc before you bring up the ini
> file in your editor 
> otherwise you will have conflicting versions and the
> emc will overwrite 
> the changes you made with whatever it thinks it
> should be. 
>  
> Ray
> 
> 
> 
> On Tuesday 24 December 2002 03:51 am, you wrote:
> > Hi
> > I am using BDIEMC209-01
> > My emc is unable to save Axis_1 and Axis_2
> parameter
> > if changed from
> > the Caliberation menu. However it saves the
> changes
> > made to
> > Axis_0 through Caliberation menu. Also it loads
> the
> > params without any problem for all the three
> > axis if the change is made manually in the ini
> > What might be the problem
> > regards
> > Babar
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Mail Plus - Powerful. Affordable. Sign up
> now.
> > http://mailplus.yahoo.com
> 


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com