Re: CVS Build Problem

[Chris Wagner <clwagner-at-eecs.wsu.edu>]

On 23 Jun, Paul wrote:
> 
> Now for the fix...
> emc/src/emcmot/tc.c comment out line 234 - The pritntf statement is the 
> problem !
> Looks like a debugging line got left in by mistake, so I've uploaded a 
> revised tc.c to Sourceforge.
> 

Paul,

Thanks for the fix, that did fix the module loading problem.  Still no
(real-time) joy though.  rtsim.run hangs at:
...
starting EMC MOTION PROGRAM -- simmod.o...Warning: [Added line break]
plat/rtai/lib/simmod.o symbol for parameter IO_BASE_ADDRESS not found
Warning: loading plat/rtai/lib/simmod.o will taint the kernel: no license
Warning: loading plat/rtai/lib/simmod.o will taint the kernel: forced load
Running inisim to send INIFILE simulation parameters to the real-time simulator.

By hangs I mean it will take 100% of a 700 MHz cpu for >two hours.

stepper.run quits with:
...
starting EMC TASK PROGRAM -- minimilltask...done
Version:  1.1
Machine:  Stepper Stand
shmem.cc 496: Shared memory buffers emcCommand and  may conflict. (key=1001(0x3E9))
shmem.cc 496: Shared memory buffers emcStatus and  may conflict. (key=1002(0x3EA))
minimilltaskintf.cc 1900: Can't send EMCMOT_DEACTIVATE_AXIS for the spindle axis.
starting EMC SERVER PROGRAM -- emcsvr...done
minimilltaskintf.cc 1900: Can't send EMCMOT_DEACTIVATE_AXIS for the spindle axis.
running EMC DISPLAY PROGRAM -- tkemc...
minimilltaskintf.cc 1900: Can't send EMCMOT_DEACTIVATE_AXIS for the spindle axis.
minimilltaskintf.cc 1900: Can't send EMCMOT_DEACTIVATE_AXIS for the spindle axis.
minimilltaskintf.cc 1900: Can't send EMCMOT_DEACTIVATE_AXIS for the spindle axis.
minimilltaskintf.cc 1900: Can't send EMCMOT_DEACTIVATE_AXIS for the spindle axis.
minimilltaskintf.cc 1900: Can't send EMCMOT_DEACTIVATE_AXIS for the spindle axis.
emcsh.cc 5642: can't connect to emc
Waiting for minimilltask to die . . .
minimilltaskintf.cc 1900: Can't send EMCMOT_DEACTIVATE_AXIS for the spindle axis.
Waiting for minimilltask to die . . .
EMC_TOOL_HALT

I looked into the ini file, but I did not see anything obvious to
change is it likely to be a config file problem?.  From previous list
messages the shared memory message is not a problem so it looks like
the real issues are the "...Can't send EMCMOT_DEACTIVATE_AXIS..." and
the "emcsh.cc 5642: can't connect to emc".

-- 
Recreational Calculus - Just For Fun!

Chris Wagner
clwagner-at-I.think.you.should.cut.thiS.eecs.wsu.edu