need your opinion!

Subject: need your opinion!
From: "hassan rabe" <rabeh-at-student.gvsu.edu>
Date: Mon, 20 May 2002 13:07:01 -0400
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="iso-8859-1"
References: <F141OHY90nw2SCHgNWG00024515-at-hotmail.com> <009401c1ff5b$494d6400$85204004-at-vz.dsl.genuity.net> <200205192045.g4JKjPRB014258-at-btc1.up.net>


 hello all,
am running the maxnc, i have a problem with the stepprs
first i have a question: are the setting for the stepper motors in the ini
file have effect on the performance of the stepper morts actaully on the
machine????
i can't get the velocity of the machine to go beyond 15 percent of
2inch/minute.....the feed rate is 13...if i go more with these
settings...the motors will just vibrate with a buzzering noise and will not
move??? so can any one tell me  what might be the problem??

Follow-Ups:
- Re: need your opinion!
  - From: "Patrick Riedlinger" <patr-at-precidesign.com>

References:
- post processor
  - From: "Troy Stevens" <troynado-at-hotmail.com>
- Re: post processor
  - From: "hassan rabe" <rabeh-at-student.gvsu.edu>
- Re: post processor
  - From: Ray Henry <rehenry-at-up.net>

Prev by Date: Programming with Variables
Next by Date: Re: need your opinion!
Prev by thread: Re: post processor
Next by thread: Re: need your opinion!

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact