RE: Port #2 Pinout

Subject: RE: Port #2 Pinout
From: "Steve Lively" <steve.lively-at-alltracorp.com>
Date: Wed, 8 May 2002 10:57:26 -0500
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset="iso-8859-1"
Disposition-Notification-To: "Steve Lively" <steve.lively-at-alltracorp.com>
Importance: Normal
In-Reply-To: <69D069CE8906D51196BB00D0B788C8820C973F-at-ALLTRA1>
Reply-To: <steve.lively-at-alltracorp.com>


Please take us off this mailing list.

Thank you.

Steve Lively
System Administrator
ALLtra Corporation

-----Original Message-----
From: emc-at-nist.gov [emc-at-nist.gov]On Behalf Of Brian
Pitt
Sent: Tuesday, May 07, 2002 12:46 AM
To: Multiple recipients of list
Subject: Re: Port #2 Pinout



the pinouts for the AUX I/O on the second LPT port are
at the very bottom of this page
http://www.mindspring.com/~pitt/EMC/EMC_docs.html
these are the defaults from bridgeportio but the AUX I/O
signals can be changed to whatever pins you want in the ini
file

the pinouts for the motors on the first LPT port are hard
coded

Brian

Prev by Date: Re:
Next by Date: Lube Sense input
Prev by thread: Re: Port #2 Pinout
Next by thread: If you want to read the web page only.

Date Index | Thread Index | Back to archive index | Back to Mailing List Page
Problems or questions? Contact