Re: "Y" axis problem

["Markus Meyer" <meyer-at-mesw.de>]

>   On the "y" axis the encoder has it's own rack and pinion making it more
> accurate as far as the Poisson of the router. My observation is that emc
> sends the dac a signal and before the amp can ramp up and move the axis
> enough to get some encoder counts it gets get a fowling error. After that
> the emc releases control of the axis and there is a small hop of the axis.

Maybe try setting the maximum following error (MAX_ERROR) on the y axis in
the ini file to a higher value.


Regards


Markus