emc startup

[dave engvall <dengvall-at-nwinfo.net>]

Hi,
Being stressed  I suspect I forgot to attach the error file.

to the proceeding message.

So lets repeat the whole thing.

start test.run
which fires up tkemc.

click on e-stop off and machine on.

click the  - jog and + jog butttons a couple of time

click on home.

exit.

Ideas?

Dave
Current platform is linux_2_0_36
Current real-time platform is rtlinux_09J
inivar = plat/linux_2_0_36/bin/inivar
INIFILE = test.ini
starting emc...
starting EMC MOTION PROGRAM -- steppermod.o...done
starting EMC IO PROGRAM --  minimillio...done
starting EMC TASK PROGRAM -- minimilltask...done
minimilltaskintf.cc 953: Error on axis 0.
minimilltaskintf.cc 953: Error on axis 1.
minimilltaskintf.cc 953: Error on axis 2.
Maximum Hardware Limit on axis 0 exceeded.
Maximum Hardware Limit on axis 1 exceeded.
Maximum Hardware Limit on axis 2 exceeded.
running EMC DISPLAY PROGRAM -- tkemc...
Maximum Hardware Limit on axis 2 exceeded.
command 1404 cannot be executed until the machine is out of E-stop and turned on
command 1406 cannot be executed until the machine is out of E-stop and turned on
command 1406 cannot be executed until the machine is out of E-stop and turned on
command 1304 cannot be executed until the machine is out of E-stop and turned on
command 1304 cannot be executed until the machine is out of E-stop and turned on
command 1312 cannot be executed until the machine is out of E-stop and turned on
command 1312 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 124 cannot be executed until the machine is out of E-stop and turned on
command 123 cannot be executed until the machine is out of E-stop and turned on
command 123 cannot be executed until the machine is out of E-stop and turned on
command 123 cannot be executed until the machine is out of E-stop and turned on
command 123 cannot be executed until the machine is out of E-stop and turned on
unix_sem.c 498: sem_wait: ERROR: Interrupted system call 4
shmem.cc 651: SHMEM: Can't take semaphore

**********************************************************
* Current Directory = /usr/src/emc
* -at-(#) RCS_LIBRARY_VERSION: 4.35 Compiled on  Oct 10 2000 at 22:16:57 for the linux_2_0_36 platform with compiler version egcs-2.90.29 980515 (egcs-1.0.3 release) .

**********************************************************
* BufferName = toolSts
* BufferType = 0
* ProcessName = emc
* Configuration File = emc.nml
* CMS Status = -1 (CMS_MISC_ERROR:	A miscellaneous  error occured.)
* Recent errors repeated:
Error on axis 2.

sem_wait: ERROR: Interrupted system call 4

SHMEM: Can't take semaphore

Error on axis 1.

* BufferLine: B toolSts		SHMEM	localhost	4096	0	0	5	12 1005 TCP=5005 disp
* ProcessLine: P emc		toolSts		LOCAL	localhost	R	0	1.0	0	0
* error_type = 5 (NML_INTERNAL_CMS_ERROR)
************************************************************

unix_sem.c 498: sem_wait: ERROR: Interrupted system call 4
shmem.cc 651: SHMEM: Can't take semaphore